Newfoundland and Labrador is 1.79× the size of Roraima
Newfoundland and Labrador (province of Canada) covers about 403,000 km² (156,000 mi²) and Roraima (state of Brazil) about 225,000 km² (86,800 mi²). Below, both outlines are drawn at one scale and centred on each other.
- 403,000km²Newfoundland and Labrador
- 225,000km²Roraima
200 km
- Newfoundland and Labrador
- Roraima
What fits
- Roraima is 56% of the size of Newfoundland and Labrador.
- Newfoundland and Labrador is larger by 179,000 km² (68,900 mi²), which is 79% of the area of Roraima.
- Measured in Belgiums: Newfoundland and Labrador is about 13.2, Roraima about 7.33.
How they differ
- Newfoundland and Labrador is larger, but Roraima has the larger population: 637,000 against 511,000, 1.25× as many people.
- Per square kilometre that is 2.8 in Roraima against 1.3 in Newfoundland and Labrador: Roraima is 2.24× as densely populated.
- Their centres are about 5,640 km apart.
- A standard web map misstates the comparison: Newfoundland and Labrador at 53°N is drawn about 2.7× too large and Roraima at 2°N about 1.0×, so the map shows Newfoundland and Labrador as 4.89× the size of Roraima instead of 1.79×.
- Together Newfoundland and Labrador and Roraima cover 628,000 km², close to the size of South Sudan (627,000 km², 0.2% smaller).
- The gap between them, 179,000 km², is about the size of Uruguay (177,000 km²).
- At Roraima's density, Newfoundland and Labrador would have 1.1 million people (it has 511,000). At Newfoundland and Labrador's density, Roraima would have 284,000 (it has 637,000).
- Newfoundland and Labrador's centre is 50.7° of latitude, about 5,630 km, farther north than Roraima's.
- Newfoundland and Labrador is the 10th largest of the 13 provinces and territories of Canada and covers 4.1% of its area; it is the 10th most densely populated of them.
- Roraima is the 14th largest of the 27 states and districts of Brazil and covers 2.7% of its area; it is the 26th most densely populated of them.
- Newfoundland and Labrador lies about 51° of latitude (roughly 5,630 km) north of Roraima.
- Shared out evenly, each person in Newfoundland and Labrador would have about 789,980 m² and each person in Roraima about 352,980 m².
- Laid side by side, Newfoundland and Labrador and Roraima would cover 628,000 km², about the same size as South Sudan.
- Together they have 1.1 million people, about as many people as Djibouti.
Side by side
| Newfoundland and Labrador | Roraima | |
|---|---|---|
| Is a | ProvinceCanada | StateBrazil |
| Area, measured | 403,000 km²156,000 mi² | 225,000 km²86,800 mi² |
| Official area | 405,000 km²Wikidata | 224,000 km²Wikidata |
| Rank by area | 10th of 13in Canada | 14th of 27in Brazil |
| Population | 511,000Wikidata, 2021 | 637,000Wikidata, 2022 |
| Rank by population | 9th of 13in Canada | 27th of 27in Brazil |
| Density | 1.3 per km² | 2.8 per km² |
| Capital | St. John's | Boa Vista |
| Latitude range | 47°N to 60°N | 1°S to 5°N |
Population: Wikidata 2021 and Wikidata 2022. Official figures: Wikidata (CC0).
- Wikidata's official figure of 405,000 km² agrees with our measured area of 403,000 km², to within 2%.
- Wikidata's official figure of 224,000 km² agrees with our measured area of 225,000 km², to within 2%.
Similar in size to Newfoundland and Labrador
Similar in size to Roraima
More from the same country
More comparisons
- California vs Newfoundland and Labrador
- Gansu vs Newfoundland and Labrador
- Newfoundland and Labrador vs Paraguay
- Newfoundland and Labrador vs Zimbabwe
- Newfoundland and Labrador vs Norway
- Newfoundland and Labrador vs Japan
- Newfoundland and Labrador vs Cape Verde
- Newfoundland and Labrador vs Victoria
- Victoria vs Roraima
- Minnesota vs Roraima
- Laos vs Roraima
- Romania vs Roraima
Sources and method
- Outlines
- Natural Earth, 1:10m Admin 1 - States, Provinces, public domain
- Boundary
- De facto, as drawn by Natural Earth. A region is drawn whole, every island included; a country is its main territory.
- Area
- Measured on the WGS84 ellipsoid from the full-detail outlines, shown rounded.
- Drawing
- Each outline is projected with an equal-area projection centred on its own centroid, so areas stay true and the two can be laid over each other.
- Data built
- 2026-11-12
